Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
0004205
Page 18 of 22
Rev 2.7 3/13/2018
Step #16
– Connecting Lift Tube Cables
Using the Key Fob remote controller, push the Down Button to run the cables down so they
can be attached to the lift platform.
Attaching cables to Aluminum Cradle Tubes:
the cable coming from the outside pulley of
the Lift Tube goes thru the outside holes in the Cradle Tube. The cable coming from the
inside pulley, on the other end of the Lift Tube, goes thru the inside hole on the Cradle
Tube.
Attaching cables to Steel Cradle Tubes:
both cables are attached to the cable mounting
brackets welded into the end of the steel Cradle Tube.
Secure the cables to the Cradle Tubes with 2 brass nuts and a flat washer as shown below.
Refer to the chart on page 11 for the proper sizes.
4000# - 6000# Aluminum
8,000# - 15,000# Steel
