Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
0004205
Page 13 of 22
Rev 2.7 3/13/2018
brackets at the height indicated on the chart on page 14 and attach the hydraulic lift tube as
shown. Tighten all fasteners securely
4,000# - 6,000#
8,000#
10,000# & 15,000#
On the fully assembled lift assemblies
for the 10,000# and the 15,000# you
will need to loosen the 1/2" lock nuts on
the plates
(DO NOT REMOVE ANY OF
THE 1/2” BOLTS OR LOCK NUTS)
which hold the assembly together. This
will allow it to slide down over the
corner post to get it in position at the
according to measurements on the
chart on page 14 or on the stops. Once
in place complete assembly using
shown hardware and tighten securely.
