Shopseries RK7866, Manual

Page: 9 / 32

9
4˝ BELT / 6˝ DISC SANDER ENG
Table 1
Minimum gage for corda
Ampere Rating
Volts
Total length of cord in feet
120V
240V
25ft.
50ft.
50ft.
100 ft.
100 ft.
200 ft.
150 ft.
300 ft.
More Than
Not More
Than
AWG
0
6
10
6
10
12
18
18
16 16
16
16 16
14
14 14
12
12
12 16
14 12 Not Recommended
California proposition 65:
WARNING: This product may contain lead,
phthalate or other chemicals known to the
State of California to cause cancer, birth defects
and other reproductive harm. Wash your hands
after use.
ADDITIONAL SAFETY WARNING FOR
YOUR TOOL
1. For Your Own Safety Read Instruction Manual
Before Operating Tool
a) Wear eye protection.
b) Support workpiece with miter gage, backstop, or
worktable.
c) Maintain 1/16 in maximum clearance between
table and sanding belt or disc.
d) Avoid kickback by sanding in accordance with the
directional arrows.
2. For belt and disc sanders, the sanding belt is
designed to rotate down towards the table
while the disc rotates both up from the table and
down towards the table, and there’s potential
risk of injury to persons if sanding against the
directional arrows on the disc.
SAVE THESE INSTRUCTIONS
Refer to them frequently and use them to instruct others
who may use this tool. If someone borrows this tool,
make sure they have these instructions.
WARNING! Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known
to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
1) lead from lead-based paint
2) crystalline silica from bricks and cement and other
masonry products
3) arsenic and chromium from chemically-treated
lumber
Your risk to these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemicals:
1) work in a well ventilated area
2) work with approved safety equipment, such as those
dust masks that are specifically designed to filter out
microscopic particles.
Avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling and other
construction activities. Wear protective clothing and
wash exposed areas with soap and water. Allowing
dust to get into your mouth, eyes, or lay on the skin
may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/
or disburse dust, which may cause serious
and permanent respiratory or other injury. Always
use NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles
away from face and body.