Shining3D Aoralscan 2, User Manual

Page: 5 / 108

5
CHAPTER
1
Read this first
The
Aoralscan 2
is an intraoral scanner that works with the
supplied software programs. With
Aoralscan 2
, you can perform
oral scanning and digitally acquire and save the 2D/3D color
images of a patient’s teeth for orthodontic, implant, and restoration
use.
This
User Manual
provides important procedures and information on
how to operate the scanner and configure the IntraoralScan
software correctly and safely. Before attempting to operate the
product, read this
User Manual
and strictly observe all warnings and
cautions. We suggest that you have easy access to the
User
Manual
whenever necessary. Pay extra attention to the information
from Safety information on chapter 2.
Copyright
Copyright ©2016 Shining3D Corporation. All rights reserved. No
part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system or translated into any language or
computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise,
without the prior written permission of Shining3D Corporation.
All other logos, products, or company names mentioned in this
User
Manual may be the registered trademarks or copyrights of their
respective companies, and are used for informational purposes only.
Disclaimer
Shining3D Corporation makes no representations or warranties,
either expressed or implied, with respect to the contents hereof
and specifically disclaims any warranties, merchantability or fitness
for any particular purpose. Further, Shining3D Corporation
reserves the right to revise this publication and to make changes
from time to time in the contents hereof without obligation of