Shining3D Aoralscan 2, User Manual

Page: 79 / 108

79
Intraoral Scanner User Manual
5
Check Bite: used to adjust and view the occlusal space of the upper and lower jaws;
Adjust Coordinate
Click the button under the "pre-design" process to enter the coordinate
position interface of the adjustment data, as shown below:
Rotate the data with the left mouse button and right-click the data to adjust the
position of the jaw.
Click the button to confirm and save the current adjustment result.
Click the button to cancel and discard the current adjustment result, and exit
the adjustment coordinate process.
Mark Teeth
Click on the button under the "Pre-design" process to enter the marker tooth
position interface, and the tooth map on the left side shows the teeth defined by the order.