Shining3D Aoralscan 2 User Manual Download Page 102

Page: 102 / 108

102

Intraoral ScannerUser Manual

CAUTION

Do not place your finger(s) on the mirror of the tip when detaching as this may

result in damage to the mirror.

Hold the supplied protection cap with the triangle mark facing upward. Then,

align the protection cap blocks to the matching slots on the front end of the

scanner body.

Slide the protection cap onto the scanner to prevent damage and dust.

Pay particular attention to inspect the mirror of the tip to ensure that the mirror

is not cracked or broken and there is no scratch on it.

CAUTION

If the mirror of the tip has cracks or scratches, stop the cleaning process and

contact your local distributor or service provider.

Gently clean the inner and outer sides of the tip using mild pH-neutral soap

water and a soft brush for 3 minutes.

• When cleaning the inner surface of the tip, insert the soft brush into the tip from

both the front and rear ends, and move the brush lightly in tiny circles.

• When cleaning the outer surface of the tip, move the brush lightly back and

forth, and repeat for each side.

Summary of Contents for Aoralscan 2













































































































Search results

Summary of Contents for Aoralscan 2

Reviews:

Related manuals for Aoralscan 2

Brands by name

Popular brands

Shining3D Aoralscan 2, User Manual

Search results

Summary of Contents for Aoralscan 2

Reviews:

Related manuals for Aoralscan 2

Brands by name

Popular brands