Shining3D Aoralscan 2, User Manual

Page: 104 / 108

104
Intraoral ScannerUser Manual
20. Pay particular attention to inspect the mirror surface of the scanner tip again to
make sure that the disinfection is done properly and the mirror is not damaged
during the disinfection process.
21. Re-attach the scanner tip (see Attaching the scanner tip on chapter 9).
Or if you attempt to store the scanner tip with other dental instruments, e.g. a
dental instrument tray, ensure that it is thoroughly dry.
Cleaning and steam sterilization
Follow the steps below to perform cleaning and steam sterilization:
1. Disconnect the power of the Aoralscan 2 (see Disconnecting the scanner on
chapter 4).
2. Hold the scanner tip firmly with your thumb and forefinger on both sides, and
then gently slide the scanner tip off from the scanner, as illustrated.
CAUTION
Do not place your finger(s) on the mirror of the tip when detaching as this may
result in damage to the mirror.
3. Hold the supplied protection cap with the triangle mark facing upward. Then,
align the protection cap blocks to the matching slots on the front end of the
scanner body.
4. Slide the protection cap onto the scanner to prevent damage and dust.
5.
Pay particular attention to inspect the mirror of the tip to ensure that the mirror
is not cracked or broken and there is no scratch on it.
CAUTION
If the mirror of the tip has cracks or scratches, stop the cleaning process and
contact your local distributor or service provider.