3D Printer User Manual
www.shining3d.com
4
7.1. Changing the Material ............................................................... 44
7.2. Cleaning the Nozzle .................................................................. 44
7.3. Accessories .............................................................................. 44
7.4. Packing list ............................................................................... 44
7.5. Specification ............................................................................. 45
8 FAQ...................................................................................................... 45
9. Contact Us .......................................................................................... 48
1. Introduction
1.1. How to use this manual
This User Manual is divided into five sections which covers the Introduction, Overview,
Installation, Operation, and Troubleshooting. Please study this manual carefully
before installation, and use the printer according to these instructions. Keep this
manual handy and refer to it when necessary.
1.2. Precautions
Please read this section carefully before using the printer.
1.2.1. Safety
The printer can only be used with the power adapters supplied by this company, or the
product may be damaged, with a risk of fire. To avoid burning, or model deformation,
do not touch the model, nozzle, or the platform by hand,or any other part of the body,
while the printer is working or immediately after it has finished printing.
Protective glasses should always be worn when removing support material. There is a
slight smell from filament material when it is being extruded. The smell is, however,
not too unpleasant. Operate in a well ventilated room but draught free, as draught will
cause warping.
1.2.2. Protection
•The printer must not be exposed to water or rain to avoid damage.
•Do not shut down the printer or pull out the USB cable when loading a digital model
or the model data may be lost.
•The printer is designed to work properly at an ambient temperature of between 15°C
and 30°C and humidity of between 20% and 50%. Operating outside these limits may
result in low quality model.
• Please turn off the printer when SD card needs to be inserted or pulled out.
• We are not responsible for any damage caused by filament material from outside
which not authorized by our company
。
