3D Printer User Manual
www.shining3d.com
33
Select” add raft” will generate a model base which helps to printing stability.
“Peel off Factor” reflects the height between model and raft. If the layer thickness is
0.2mm and the strip rate is 2.3, which means the height between model and raft is
0.46mm. So lower number means the more tighten that model stick to raft.
Select “Thin-wall” means only external shell except top surface will be created without
any internal support.
Set the nozzle heating temperature.
Select “Follow Start Build” to start printing automatically after generating Path file.
Path view
Path view
：
You may view the path of model if you click ‘Tools’-’Path Viewer’.
6.2. Extruder control
Click menu ->”Tools”->”Manager for material”, choose “Material In”, then click “next”,
see figure 6.2.1.
