3D Printer User Manual
www.shining3d.com
41
Figure 6.5.5
⑤
Click “
”from “platform Leveling” dialog box, and move the platform to the corner
(“bottom left” corner) which corresponds to screw “
（
a
）
”
⑥
Click “
”from “platform Leveling” dialog box to rise the platform to highest point.
If platform is near nozzle, please adjust a little from “Control Panel”. If the platform is
far from nozzle, don’t need to adjust, you can set the Z axis height after the platform
leveling.
⑦
Click “
”from “platform Leveling” dialog box and move the platform to the corner
(“bottom right ”corner) which corresponds to screw “(b)”. Then compare the height of
“bottom left” corner (the height between nozzle and worktable, similarly hereinafter) ,
and adjust screw “(b)” to make sure the height is the same as “ bottom left corner”.
Click “
” and “
” to check the height difference and adjust to the same height as
nozzle. Don’t move this two screws any more after operation finished.
⑧
Click “
”from “platform Leveling” dialog box and move the platform to the
“center of Y axis” position and check the height to adjust screw “(c)” to make sure the
height is the same as we did in last step. Click “
” and “
” to check the height
difference and adjust screw “(c)” to the same height as nozzle height(during the
adjusting, maybe there is some space between worktable and nozzle, and it can be
