Shini SGS-6080S, Operation Instructions Manual

Page: 63 / 77

63(77)
4.6 Parameter Setting
Parameters are set via SIEMENS LOGO! Controller. Firstly, confirm parameters
based on demands then input parameters to controller manually. Turn on
control panel and enter LOGO! Setting.
4.7 Parameters List
Param. No. Function Remark
B1 Startup reversely running Cleanup of residual material, default is 5S.
B2 Star start time Star starting time, default is 10S.
B5
Shredding time
When swing arm moves to lowest position
and time remained, default is 20S.
B6
Interval between startup and first
feeding After startup, swing arm stays in top and time
remained until first feeding, default is 10S.
B7 Rejected material time remained
Time remained when swing arm returns to
the top, default is 5S.
B9
Shutdown time after start and
reverse running Shutdown time after reverse running, default
is 5S.
B11
Detect if swing arm stays in upper
and lower limits. Detect time of swing arm remains in limits,
default is 15 times.
4.8 Parameter Input
Initial screen of SIMENS LOGO
！
is the clock and date.
1) Press
“
ESC
”
key to switch LOGO
！
controller from Operation mode to
Parameter assign mode and a menu comes out:
Below are the functions of 4 menu keys:
STOP
Press this key to turn off controller.