Shini SGS-6080S, Operation Instructions Manual

Page: 69 / 77

69(77)
15. Check the overload protection function.
16. Check all the wires to ensure no breakage. Period: Weekly
6.1 Maintenance
All maintenance work must be finished by professional personnel in order to
avoid human injury and machine damage.
6.1.1 Replacement of Blades
Warning!
After replacing rotate blades, make sure fix new blades tightly to avoid
the constant contact between rotate blade and fixed blade.
Users must press emergency switch and turn off main power switch
while replacing the blades!
Blades are extremely sharp. Please put on gloves before operation and
please be very careful during operation to avoid cut injury!
Refer to chapter 3.4 for assembly during blades maintenance and
replace. After fix screws, use thread fixing agents (Blue, LOCTITE234) to
fill the joints to tighten them to avoid slipping.
Attention!
During assembly and disassembly of blades, dismantle motor baffle and
pull belt to rotate cutter shaft. Do not rotate shaft manually to avoid
personal injury.
Attention!
To avoid accidents caused by shaft autorotation, use a wood block to
fasten fixed blades and rotate blades.
Check if screen is damaged after replace blades, replace screen if
serious wear or deformation is caused.
Replace screws and washers along with blades
Before replace rotate and upper fixed blades, open storage hopper and