Shini SGS-6080S, Operation Instructions Manual

Page: 20 / 77

20(77)
Shredder is equipped with a removable feed hopper, which can be customized
based on varied sizes.
For shredding hard or brittle materials, regrinds may pop put of feed
hopper. Add a baffle or other plates in feed hopper to solve the problem.
Single-shaft shredder is controlled by control cabinet and control station.
There
’
re power switch in the cabinet and control panel in control station, which
are used to operate or debug machine.
2.2 Security System
In order to prevent from accidental human injury during the operation, the
granulator is equipped with highly secured protection system.
Nobody is allowed to make any changes of security system in any condition.
Otherwise, the machine might be in dangerous state and liable to cause
accidents. Maintenance and repair for security system must be accomplished
by profession personnel.
The company will not continue to perform any commitment if anyone makes
any change of granulator's security system and the replacement of all
components must be provided by Shini Company.
Picture 2-2: Main Power Switch