6
5. Operating Procedures
5-1. Using the Lamp Fitting
WARNING: ELECTRIC SHOCK
Do not touch this Light Tower during operation if it or your body is wet.
CAUTION: INJURY
To change the direction of the lamp fitting, hold the lamp fitting lever with one
hand and support the lamp fitting while loosening the fixing handles (rotation
and tilt handles).
Do not adopt an unnatural posture when adjusting the direction of the lamp
fitting.
When changing the LED illumination angle, be careful not to insert your
fingers between the LED plate and LED mounting stay.
CAUTION: BURNS
Do not touch the LED, lamp guard when the LED is lit up or immediately after
being turned off as they are extremely hot.
(1) Adjusting the Lamp Fitting Right/Left Rotation
Hold the lamp fitting lever with one hand and
loosen the rotating handle.
Move the lamp fitting lever to adjust the
direction to the right or left, and tighten the
rotating handle.
Tighten the rotating handle again by using
both hands and securely fix the lamp fitting.
(2) Adjusting the Lamp Fitting Tilt Angle
Tilt the lamp fitting as necessary according to the application. Place the lamp fitting to
horizontal when storing.
<Note>
Use at an incline angle within a range of 45°
from vertical due to the wind receiving area
increasing when placed horizontally.
Hold the lamp fitting lever with one hand and
loosen the tilt handle.
Move the lamp fitting lever to adjust the tilt
angle and tighten the tilt handle.
Tighten the tilt handle again by using both
hands and securely fix the lamp fitting.
<Note>
Be careful not to forget to tighten the tilt handle because the lamp fitting seems to be
secured, as weights of the auxiliary spring and lamp fitting are balanced even though the
tilt handle is not actually tightened. Be careful not to forget to tighten at the vertical
position.
1
2
3
1
2
3
Lamp Fitting Lever
Rotating Handle
Lamp Fitting Lever
Tilt Handle
