8
6. Assembly at Purchase
Although the outer cover is fitted to the LED balloon lamp fitting when shipped from the
factory, the internal balloon fabric is not installed. Perform the following procedures to install.
6-1. Removing the Lamp Fitting Cover
Place the lamp fitting horizontally and secure it. (Refer to "5-1. Using the
Lamp Fitting".)
Remove the lamp fitting cover.
<Removing the Lamp Fitting Cover>
1
Untie the knot of the cord, slide the cord
stopper, and make the opening wider.
Insert the lamp fitting lever protruding out from
the cover cut into the cover.
Open the zipper and remove the cover.
<Storing the Lamp Fitting Cover>
1
Close the zipper.
Fold both ends of the cover so that the Velcro
tabs comes together at the edges.
Fold right in the middle so that the Velcro tabs
become affixed.
Attach the grommet to the storage hook.
1
2
Lamp Fitting Lever
Cut
Cord Stopper
Zipper
Velcro
Grommet
Storage Hook
Grommet
Outer Cover
Velcro
