background image

Introduction

 

 

Thank you for purchasing this Shindaiwa LED Balloon Light Tower. 

 

 

This manual has been created to ensure safe usage of this Light Tower. 
Be  sure  to  read  this  manual  before  operation.  Improper  operation/handling  of  this  Light 
Tower will result in an accident or malfunction. 

 

 

Handling and operation of this Light Tower can only be performed by persons who fully 
understand  the  contents  of  this  manual,  and  are  capable  of  safe  handling/operation. 
Persons who suffer from an illness, are taking medicine, or are not feeling well to a degree 
that safe operation would be hindered must not operate this Light Tower. 

 

 

Work performed using this Light Tower and handling/operation of this Light Tower must be 
in accordance with corresponding laws and regulations based on such laws. 

 

 

Be  sure  to  always  include  this  manual  when  loaning  out  this  Light  Tower  and  instruct 
operating personnel to carefully read this manual before operation. 

 

 

Store  this  manual  in  a  specified  location  where  it  will  be  secure  and  available  for 
consulting at any time. 
Order another copy from the authorized distributor where this Light Tower was purchased 
if this manual becomes lost, dirty or damaged. 

 

 

Consult with the authorized distributor where this Light Tower was purchased if you have 
any inquiries regarding any points related to this Light Tower and manual. 
Be  sure  to  provide  the  model  name  and  serial  number  when  inquiring  about  this  Light 
Tower. 

 

 

If disposing of this Light Tower, do so in a manner that is in compliance with laws related 
to industrial waste. Contact authorized distributor where this Light Tower was purchased if 
you have any inquiries regarding proper disposal. 

 

 Caution notice ranks in this manual are classified as follows. 

 
 
 
 
 
 
 
 
 
 

 

Not that "     

CAUTION

" items can also lead to major accidents under some circumstances 

if not correctly followed. All caution notices are important. Be sure to follow all of them. 

 
 
 

 
 
 

WARNING

:  Indicates  a  potentially  hazardous  situation  which,  if  not  avoided,  can 

result in death or serious injury. 

 

CAUTION

:  Indicates  a  potentially  hazardous  situation  which,  if  not  avoided,  can 

result in minor or moderate injury and property damage. 

 

<Note>

Notes  regarding  care  of  and  achieving  optimal  service  from  this  Light 
Tower. 

Summary of Contents for SBL750L-M

























Reviews: