Shindaiwa DGM60MK, Owner'S Manual

Page: 18 / 48

15
< NOTE >
When disconnecting piping from the external tank, turn the lever to the “A” side, and attach the
included connecting hose to the external tank fuel inlet/return.
(2) If using an external fuel tank:
Pass the fuel hose from the external tank through the external fuel ports and connect to
the external tank fuel inlet/return of the 3way fuel valve. Change the lever of the 3way fuel
valve to the “B” side to supply fuel from the external tank.
Refer to “9-6. Connecting an External Fuel Tank” for corresponding procedures.
< NOTE >
Protect the piping connecting the external fuel tank and this generator with corrugate tubing or
similar in order to prevent interference between the generator internal parts and the external fuel
ports.
6. Transporting/Installing
6-1. Transport Procedures
WARNING : INJURY
Do not suspend using tie downs. Use of such could result in the generator falling.
No persons should be under a suspended generator.
CAUTION : INJURY
Always be sure to use lifting hooks when suspending the generator, and raise it
slowly at a completely vertical angle.
Personnel performing suspension work must wear protective gear such as
helmets, safety shoes and gloves.
Do not move the generator during operation.
(1) Lifting Procedures
Always be sure to always use lifting hooks when suspending the generator, and raise it
slowly at a completely vertical angle.
(2) Transport
When transporting this generator, tie rope to the left and right tie downs, and securely fix the
generator.
3Way Valve
External Fuel Ports
Position A
Inlet port Return port
Position B