Shindaiwa DGK14F, Owner'S And Operator'S Manual, Page: 35 / 50

32
Description Daily
Every
100 hrs
Every
200 hrs
Every
400 hrs
Every
450 hrs
Every
500 hrs
Every
800 hrs
Every
1000 hrs
Every
1500 hrs
E
n
g
ine
Valve clearance
(Check/Adjust)

Fuel injector
(Check)

Elimination of
carbon in the
exhaust pipe line
and muffler

Ge
n
e
ra
to
r
Indicators, Gauges
(Check)

Alarms
(Check)
Insulation test

Ot
h
e
rs
Spill containment
fluid (Check/Drain)

Spill containment
(Check/Clean)


(Clean)
(1) Engine Oil Replacement
First Time 50 hours
Thereafter Every 200 hours
Set a container to catch spilled engine oil.
Remove the oil filler cap.
After removing the oil drain plug and packing(a
rubber seal is attached),open the oil drain valve
and drain the engine oil.
After the oil has been drained,close the oil drain
valve and reinsert the oil drain plug with new
packing(a rubber seal is attached).
Add oil through the oil filler until it is at the maximum
level while checking the oil level using the oil level
gauge.
Attach the oil filler cap.
< Note >
 Refer to section “
8-1. Checking Engine Oil
” for engine oil
replacement amounts and types.

Replace the packing of the oil drain plug with new packing
each time the oil is replaced.

Packing part no.: V106-000190

After reinserting the oil drain plug and shortly after starting
the engine, be sure to always check that there is no oil
leakage.
Oil Filler
Oil Level
Gauge
Oil Drain Plug
Packing
1
2
3
4
5
Oil Drain Valve
Close
Open
Oil Drain Plug
Oil Drain
Valve
6