Shindaiwa DGK14F, Owner'S And Operator'S Manual, Page: 16 / 50

13
(6) SPILL CONTAINMENT (Spill Containment Amount) Checking Indicator
The SPILL CONTAINMENT checking indicator illuminates if the liquid stored in the spill
containment exceeds approximately about4.5gal(17 liters) during operation. If it illuminates,
immediately stop the engine and flush the liquid stored in the spill containment.
(Refer to section
“10. Inspection/Maintenance (9) Flushing Liquid in Spill Containment”
.)
< Note >

The engine may not be stopped only if the spill containment checking indicator illuminates during
operation.

When the spill containment checking indicator illuminates during operation, stop the engine,
check for fuel, oil and coolant leakage, and repair as necessary.

Do not use the equipment with liquid accumulated in the spill containment. Drain the spill
containment before using.
5-4. Spill Containment (Spill Containment Amount) Overflow Warning Indicator
If the liquid stored in the spill containment exceeds approximately about 13.5gal(51 liters)
during operation, the SPILL CONTAINMENT overflow warning indicator illuminates, and the
engine automatically stops. If this occurs, flush the liquid stored in the spill containment.
(Refer to section
“10. Inspection/Maintenance (9) Flushing Liquid in Spill Containment”
.)
< Note >

Although the fluids that can leak internally consist of oil, fuel and coolant, the spill containment
does not have a function that can separate rainwater that has leaked into the equipment from
these internally leaked fluids. Properly dispose of liquid drained from the spill containment in a
manner according to the applicable laws and regulations.
5-5. Meters and Gauges
Engine Meters and Gauges
(1) Hour Meter
Displays the operating time. Use this as a reference for managing periodic inspection
interval.
(2) Engine Monitor
Displays the engine speed, coolant temperature and oil pressure. Switching the selector
switch changes the display in the following order: Speed

Water temp

Oil press. Engine
speed is displayed first when the engine is started.
WARNING : INJURY

Do not open the check door when the starter switch is in the AUTO or START
position. It will cause injury by rotating parts such as cooling fans and fan belt.

Always turn the starter switch to the STOP position and stop the engine,
then close and lock OPERATION PANEL DOOR before checking or
maintaining the engine or any equipment.
CAUTION : BURNS

Do not touch the engine and surrounding components immediately after
stopping the engine as they are still extremely hot.
CAUTION : FIRE

If fuel or oil leaks, repair the leaking location before operating.