Shindaiwa DGA50CM, Owner'S And Operator'S Manual, Page: 44 / 52

40
(11) Change Coolant
Remove the Radiator Plate.
Remove the Radiator Cap.
Loosen the Radiator Drain Cock and the Drain Plug on the engine
side.
After draining finishes,
tighten the Radiator Drain
Cock and the Drain Plug
on the engine side.
Remove the Sub Tank Stay
and drain coolant in the Sub Tank.
Reinstall the Sub Tank and fill coolant up to FULL
level.
Fill coolant into Radiator up as far as the water
inlet level.
Tighten the Radiator Cap.
Reinstall the Radiator Plate.
< Note >
 Refer Coolant to
『
8-2. Checking Coolant/Water
』
.
2
3
4
5
6
7
9
1
Change 2 years or 1000 hours
8
Radiator Cap
Radiator Plate
Water Inlet
Radiator Drain Cock
Drain Plug
Coolant Drain Fuel Drain
Sub Tank
Sub Tank Stay