Shindaiwa DGA37CM, Owner'S And Operator'S Manual

Page: 35 / 56

31
< Note >

Ensure that all the air is completely extracted from fuel line, by setting the throttle
lever to START and start the engine. In the case air is in the fuel line, the engine
speeds is unstable. In the case, extract the air again by using the priming pump as
per the following process.
※
Extracting the air using the priming pump
Set the Power Switch to OFF position.
Push down the Primer Pump on the upper
part of fuel filter about 20times.
9-3. Stopping
Turn the switch on the equipment and the circuit breaker on the load to OFF.
Turn every circuit breaker to OFF position.
Turn the Throttle Lever to <START POSITION>.
Let engine idles for approximately 3 minutes. (for cool down)
Press the Stop button to shut off the engine.
Turn the Power Switch to OFF position.
Turn the Battery Isolator to OFF position.
5
6
1
2
4
7
3
Push Primer Pump
Fuel Filter
1
2