Shindaiwa DGA37CM, Owner'S And Operator'S Manual

Page: 15 / 56

11
3P Breaker 1P Breaker
5-2. Switches
(1)
Power Switch / Air Bleeding
This is the main Power Switch of the generator.
When the Power Switch turned to OFF position, the Controller is OFF.
When the Power Switch turned to AIR BLEEDING position,
automatically starts air-bleeding device.
(2) Emergency Stop Button
This button is used to stop the engine in emergency.
By inserting the button, the engine stops.
Be sure to restore the Power Switch to OFF and re-set
the button, turning clockwise after using the emergency stop button.
(3) Main Circuit Breaker
By turning this circuit breaker on the control panel to ON,
Power will be transferred to the output receptacles and to the
load side.
The breaker trips to OFF, either overload or short-circuit.
< Note >

Do not use this breaker as the ON/OFF switch to the load.
(4) 3-Phase Circuit Breaker
1-Phase Circuit Breaker
Each receptacle, 3-Phase and 1-Phase is
incorporated with circuit breaker respectively.
The breaker trips on overload or short-circuit on
to stop power transmission to load.
< Note >

Do not use this breaker as the ON/OFF switch to the load.