Shimano EDISON COMP I-12 Page 202 Original Operating Instructions Download

Page: 202 / 257

MY22H03 - 22_1.0_01.10.2021

201

Maintenance

8.5.9.1 FOX component-specific maintenance

FOX Service must perform maintenance on
suspension forks, rear frame dampers and
suspension seat posts.



Maintenance includes a complete inspection of
interiors/exteriors.



All dampers are reconditioned.



The airtight seals are replaced in air
suspension forks.



The air spring is reconditioned.



The oil is changed.



The dust wipers are replaced.

More information at:

www.foxracingshox.de/service

Summary of Contents for EDISON COMP I-12


































































































































































































































































Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands

Shimano EDISON COMP I-12, Original Operating Instructions

Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands