Shimano EDISON COMP I-12, Original Operating Instructions, Page: 120 / 257

MY22H03 - 22_1.0_01.10.2021
119
Operation
6.6.2 Setting the language

The settings menu is opened.

Press switch Y (left) or switch X (left) briefly
repeatedly until LANGUAGE is displayed on
the menu.
 Press the button (display) or switch A (left) .

There are six options:

Push switch Y (left) or switch X (left) briefly
until the required language is highlighted.

Press the button (display) or switch A (left) .
 The language has been changed.
6.6.3 Setting units

The settings menu is opened.
 Press switch Y (left) or switch X (left) briefly
repeatedly until UNIT is displayed on the
menu.
 Press the button (display) or switch A (left) .

There are two selection options:
 Push switch Y (left) or switch X (left) briefly
until the required function is highlighted.
 Press the button (display) or switch A (left) .
 The unit has been changed.
 The display screen switches back to the start
screen.
6.6.4 Adjusting the time
Set the hours and then the minutes. The values
can be changed quickly by holding down the
Y
switch (left) or X switch (left) .

The settings menu is opened.
 Press switch Y (left) or switch X (left) briefly
repeatedly until CLOCK is displayed on the
menu.

Press the button (display) or switch A (left) .
 The set time is displayed. The hour indicator is
highlighted.
 Press the switch Y (left) or switch X (left)
repeatedly until the required hour is displayed.
 Press the button (display) or switch A (left) .

The minute indicator is highlighted.

Press switch Y (left) or switch X (left) briefly
repeatedly until the required minute is
displayed.
 Press the button (display) or switch A (left) .

The display screen switches back to the start
screen.
Language
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ITALIANO
ESPAÑOL
Table 47: Language change options
Display Function
KM Unit in km
MILE Unit in miles
Table 48: Units change options