Shimano EDISON COMP I-12, Original Operating Instructions

Page: 4 / 257

MY22H03 - 22_1.0_01.10.2021
3
Contents
4 Transporting and storing
4.1 Weight and dimensions for transportation 57
4.2 Designated handles, lifting points 57
4.3 Transportation 58
4.3.1 Using the brake transport securing system 58
4.3.2 Transporting the pedelec 58
4.3.3 Shipping a pedelec 58
4.3.4 Transporting the battery 58
4.3.5 Shipping the battery 58
4.4 Storing 59
4.4.1 Break in operation 59
4.4.1.1 Preparing a break in operation 59
4.4.1.2 Carrying out a break in operation 59
5 Assembly
5.1 Unpacking 60
5.2 Required tools 60
5.3 Commissioning 61
5.3.1 Checking the battery 61
5.3.2 Preparing the wheel 62
5.3.3 Installing the wheel in the SUNTOUR fork 63
5.3.3.1 Screw-on axle (12AH2 and 15AH2) 63
5.3.3.2 20 mm cross axle 64
5.3.3.3 Q-LOC quick release 66
5.3.4 Fitting the pedals 67
5.3.5 Preparing the LIMOTEC seat post 68
5.3.6 Checking the stem and handlebars 69
5.3.6.1 Checking the connections 69
5.3.6.2 Checking stem is firmly in position 69
5.3.6.3 Checking the headset backlash 69
5.4 Pedelec sale 69
6 Operation
6.1 Risks and hazards 70
6.2 Tips for a greater range 72
6.3 System messages 73
6.3.1 On-board computer warnings 73
6.3.2 Error message screen 74
6.3.3 Battery error message 75
6.4 Instruction and customer service 76
6.5 Adjusting the pedelec 76
6.5.1 Preparing 76
6.5.2 Pedelec adjustment procedure 77
6.5.3 Determining the sitting position 78
6.5.4 Adjusting the saddle 80
6.5.4.1 Straightening the saddle 80
6.5.4.2 Adjusting the saddle height 80
6.5.4.3 Setting the saddle height with the remote control 81
6.5.4.4 Adjusting the saddle position 82
6.5.4.5 Adjusting the saddle tilt 82
6.5.4.6 Checking saddle stability 82
6.5.5 Handlebars 83
6.5.5.1 Handlebar width 83
6.5.5.2 Hand position 83
6.5.5.3 Adjusting the handlebars 83
6.5.6 Stem 84
6.5.6.1 Adjusting the handlebar height with quick release 84
6.5.6.2 Setting the quill stem 85