manualshive.com logo in svg

Shimano EDISON COMP I-12, Original Operating Instructions, Page: 125 / 257

Share
Download
Shimano EDISON COMP I-12 Original Operating Instructions Download Page 125

MY22H03 - 22_1.0_01.10.2021

124

Operation

The specialist dealer will provide instruction on 
how to handle the pedelec and the child seat.

6.9.2

Trailer

 

 

A pedelec which is approved for towing a trailer 
will bear an appropriate adhesive label. You may 
only use trailers with a tongue load and weight 
which do not exceed the permitted values. 

Figure 129:  Trailer sign

 

The specialist dealer will advise on choosing a 
suitable trailer system for the pedelec. The 
specialist dealer must install the trailer the first 
time to ensure that it is fitted safely.

6.9.3

Pannier rack 

The specialist dealer will advise on choosing a 
suitable pannier rack. 

The specialist dealer must install the pannier rack 
the first time to ensure that it is safely fitted.

When installing a pannier rack, the specialist 
dealer makes sure that the fastening mechanism 
is suitable for the pedelec and that all components 
are installed and firmly fastened. They will also 
ensure that shift cables, brake cables, hydraulic 
lines and electrical cables are adjusted as 
necessary, the rider has optimum freedom of 
movement and the pedelec's maximum permitted 
total weight is not exceeded.

The specialist dealer will provide instruction on 
how to handle the pedelec and the pannier rack.

Crash caused by brake failure

The braking distance may be longer if the trailer 
is carrying excessive load. The long braking 
distance can cause a crash or an accident and 
injuries.

Never exceed the specified trailer load.

Notice

The operating and safety instructions for the 
trailer system must be observed.

The statutory regulations on the use of bicycle 
trailers must be observed.

Only use type-approved coupling systems.

CAUTION

!

Summary of Contents for EDISON COMP I-12


































































































































































































































































Reviews:

No comments