5
TO ENSURE SAFETY
TO ENSURE SAFETY
DANGER
Be sure to also inform users of the following:
Handling the battery
•
Do not deform, modify, disassemble or apply solder directly to the battery. Doing so may cause leakage, overheating, bursting, or ignition of the
battery.
•
Do not leave the battery near sources of heat such as heaters. Do not heat the battery or throw it into a fire. Doing so may cause bursting or ignition
of the battery.
•
Do not subject the battery to strong shocks or throw it. If this is not observed, overheating, bursting, or fire may occur.
•
Do not place the battery into fresh water or sea water, and do not allow the battery terminals to get wet. Doing so may cause overheating, bursting,
or ignition of the battery.
•
Use the battery and charger combination specified by the company for charging and follow the charging conditions specified by the company. Not
doing so may cause overheating, bursting, or ignition of the battery.
WARNING
•
Be sure to follow the instructions provided in the manuals when installing the product.
It is recommended that you use only genuine Shimano parts. If parts such as bolts and nuts become loose or damaged, the bicycle may suddenly fall
over, which may cause serious injury. In addition, if adjustments are not carried out correctly, problems may occur, and the bicycle may suddenly fall
over, which may cause serious injury.
•
Be sure to wear safety glasses or goggles to protect your eyes while performing maintenance tasks such as replacing parts.
•
For information on products not explained in this manual, refer to the manuals provided with each product.
•
After reading the dealer's manual thoroughly, keep it in a safe place for later reference.
Be sure to also inform users of the following:
•
Be careful not to let yourself be distracted by the cycle computer display while riding the bicycle. Otherwise, you may fall off the bicycle.
•
Before riding, check that the wheels are secured. Otherwise, you may fall off the bicycle and be seriously injured.
•
Be sufficiently familiar with how to start the power assisted bicycle before riding on busy streets. Otherwise, you may start the bicycle abruptly and
have an accident.
•
Make sure that the light is on during night riding.
Summary of Contents for BT-E6000
