Shimano Steps BT-E6000, Dealer'S Manual

Page: 15 / 57

Installation
Installing the battery mount
15
Example of routing the electric wire
Example 1:
Secure the electric wire of the
assist switch (A) to the handlebar using the
cable band (B) . Wind the excess electric wire
around the area between the cycle computer
(C) and stem (D) , then connect the wire to the
cycle computer.
(D)
(B) (C) (A)
(A)
Assist switch
(B)
Cable band
(C)
Cycle computer
(D)
Stem
Example 2: Secure the electric wire of the
assist switch to the handlebar using the cable
band. Bind the electric wire of the assist switch
and that of the cycle computer
(E) to the brake
outer casing using (F) the band (G) and connect
the electric wire of the assist switch to the cycle
computer.
(E)
(F)
(G)
(E)
Electric wire of the cycle computer
(F)
Brake outer casing
(G)
Band
The band is included in SC-E6000.
„
Installing the battery mount
SM-BME60
Align the mounting holes in the carrier with
those in the battery mount. Insert hexagon
socket head cap screws
(A) into the upper part
of the battery mount and tighten it to the
carrier.
(A)
(A)
Hexagon socket head cap screw
(M5)
Bolts and nuts are not included with Shimano
products. Use those supplied by the
manufacturer.
For information on the tightening torques,
contact the manufacturer of the carrier.