Shimano Steps BT-E6000, Dealer'S Manual

Page: 28 / 57

Installing and wiring the drive unit
Installing the crank and front chainring
To be continued on next page
28
„
Installing the crank and front chainring
1
Install the left crank arm. Align the crank
arm with the round indentation
(A) in
the square spindle in the direction
shown in the illustration.
(A)
(B)
(A)
Indentation
(B)
Installation direction of the crank
arm
2
Attach the crank arm fixing bolt and
tighten it with a 14 mm socket wrench
(C) .
(C)
(C)
14 mm socket wrench
Tightening torque:
35 - 50 N·m
{306 - 437 in. lbs.}
3
Align the cutout in the front chainring
(D) with the wide area (F) on the
chainring installation part (E) when
inserting the front chainring.
< In the case of DU-E6000 >
• When installing a front chainring
labeled "SM-CRE60", a spacer needs to
be placed between the front chainring
and the chainring installation part.
< In the case of DU-E6001 >
• This can be attached only on front
chainrings labeled "SM-CRE60".
• There are also models without a wide
area. For those models, positioning is
not needed to install the front
chainring.
(D)
(E)
(F)
(D)
Front chainring
(E)
Chainring installation part
(F)
Wide area