Shimano Steps BT-E6000, Dealer'S Manual

Page: 37 / 57

Cycle Computer Display and Setting
Basic screen display of the cycle computer
37
(A)
(D)
(B)
(C)
(E)
(F)
(A)
Speed
Displays the current speed.
(B)
Clock
Displays the current time.
(C)
Speed unit display
You can switch between km/h and
mph.
(D)
Battery level indicator
(E)
Changing the assist mode display
(F)
Gear and traveling data display
E
Assist Shift
Displays the current assist mode. Press
Assist-Y or Assist-Z on the assist switch to
switch assist modes.
Assist Assist
(E)
Changing the assist mode display
< Walk assist mode >
Assist Shift
2 seconds
When the speed indicator is "0",
pressing the Assist-Z button for 2 seconds
switches to the walk assist mode.
Press Assist-Y to switch the mode to
"OFF".
Assist Shift
Pressing
and
holding
down
When "WALK" is displayed, press and
hold down Assist-Z on the assist switch to
start the walk assist function. Releasing
Assist-Z stops the walk assist function, or
pressing Assist-Y can stop the walk assist
function.
NOTE
When "WALK" is displayed, the mode
changes to "OFF" if Assist-Z on the assist
switch is not operated for 1 minute or longer.
•
If the bicycle does not move after the walk
assist function turns on, the function
automatically stops. To restart the walk
assist function, release the assist switch and
press and hold down Assist-Z again.
•
The walk assist function can operate at a
maximum of 6 km/h.
•
The assistance level and speed vary with
the gear position.