manualshive.com logo in svg

Shimadzu UW2200HV, Instruction Manual

Share
Download
Shimadzu UW2200HV Instruction Manual Download Page 51

35

7.  Menu Item Selection

7.5.3

Menu Lock

The “Menu Lock” function locks the menu item selection to protect the current settings from undesired
alterations. 
Menu Lock can be activated or released only at the “oFF” display immediately after the balance is con-
nected to the power. 

1

Disconnect power from the balance once.

Then, reconnect power to the balance.

2

Press and hold down the 

[CAL]

 key for about

three seconds during “oFF” display. “LoCKEd” is
briefly displayed to indicate that the menu is
locked.

1

Disconnect power from the balance once.

Then, reconnect power to the balance.

2

When “oFF” is displayed, press and hold down

the 

[CAL]

 key for about three seconds.

3

“rELEASE” is briefly displayed to indicate that

the menu lock has been turned off.

(

How to lock the menu)

   Notes

•

is illuminated during “oFF” display or STAND-BY while Menu

Lock is activated.

• “LoCKEd” is displayed upon an attempt of access to the menu including

releasing the currently set function, while Menu Lock is activated.

• All the menu item selections including WindowsDirect setting (

6.2.1

) are

locked. The operational condition setting for Animal Weighing (

14.6

) and

the environmental setting for Pouring mode (

11.2

) are also locked under

Menu Lock.

• Change of minimum display (See 

9.2

, 

14.1

, 

14.2

) is not locked by Menu

Lock.

• Change of unit display (See 

5.2

) is not locked by Menu Lock.

(

How to remove Menu Lock)

Summary of Contents for UW2200HV



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands