Shimadzu UW2200HV, Instruction Manual, Page: 43 / 130

27
6. WindowsDirect Function
6.2.4 Start and Checking Operation
1
Confirm Windows ® is free from any application.
2
After Windows ® has completely started, con-
nect power cord from the AC adapter to the bal-
ance, when “oFF” is displayed, press the
[POWER] key. The mass display appears.
3
Open the “Note pad” accessory in Windows
®
*
(or start the application you wish to use).
4
Press the [PRINT] key of the balance.
Verify that the numeric value displayed on the bal-
ance appears at the cursor position on the screen
of computer. The effect is the same as typing the
value from the computer keyboard and pressing
the ENTER key. Characteristics indicating the unit
of measure are not sent to the computer.
5
Test combination with Auto Print function, if you
wish to use it. (Refer to 13.3 )
6
End the operation using the standard close or
exit procedure.
Note
Turning ON the balance before Windows ® * is completely activated may
cause incorrect operation.
Note
To output date and time from the balance, press and hold the [PRINT]
key for about 3 seconds.