Shimadzu UW2200HV, Instruction Manual

Page: 101 / 130

85
15. Connecting Peripheral Instruments
Read Chapter 7 Before Use of
These Pages
(ii) Commands related to operation keys
(iii) Commands related to application measurement
(iv) Commands related to unit conversion
POWER Equivalent to the [POWER] key.
Q Equivalent to the [POWER] key.
MENU Equivalent to the [CAL] key.
TARE Equivalent to the [O/T] key.
T Equivalent to the [O/T] key.
UNIT Equivalent to the [UNIT] key.
PRINT Equivalent to the [PRINT] key.
POWER+ Equivalent to holding the [POWER] key for approximately 3 seconds.
MENU+ Equivalent to holding the [CAL] key for approximately 3 seconds.
UNIT+ Equivalent to holding the [UNIT] key for approximately 3 seconds.
PRINT+ Equivalent to holding the [PRINT] key for approximately 3 seconds.
RECALC Equivalent to the [RECALC] key of the AKB-301Application Keyboard.
C Equivalent to the [C] key of the AKB-301 Application Keyboard.
PEAK Sets the Peak Hold mode.*
AZERO Sets the Auto Zero mode ON.*
INTERVAL Sets the Interval Timer mode.*
MEMORY Sets the Formulation mode.
M Immediately operates after setting the Formulation mode.
ADDON Sets the Add-on mode.
+ Immediately operates after setting the Add-on mode.
A Sets the Animal Weighing mode.*
ANIMAL Sets the Animal Weighing mode.*
R Releases the Application weighing mode.
g Switches to “g” unit.
kg Registration of “kg” unit and switching.
mg Registration of “mg” unit and switching.*
PERCENT Registration of “%” unit and switching.
% Sets 100% when display is in “%” unit.
G g
← →
% switching.
PCS Registration of “PCS” unit and switching.
CT Registration of “carat” unit and switching.
MOM Registration of “momme” unit and switching.*
SDENSE Registration of “solid density” unit and switching.
LDENSE Registration of “liquid density” unit and switching.
CU Switches to “user” unit (Set the conversion coefficient beforehand.).
RSTUNIT Returns the default units.
*Not applicable to a verified balance as a legal measuring instrument in the EU