44
10. Calibration
10.3 Calibration Settings
One of the following four calibration methods listed in the below step
3
is selected as “preset calibra-
tion method”. Preset calibration method will be called with only one key touch from the mass display for
convenience of frequent use. Select your most frequently used method here. The default setting is
“i-CAL” (“E-CAL” for AUY). The rest of the methods are alternative calibration methods, which can also
be performed at any time by entering the function selection menu. Procedures for performing each cal-
ibration method as the preset or as an alternative calibration method are described in
.
10.3.1 Selecting Preset Calibration Method
1
From the mass display, press the
[CAL]
key
repeatedly until the “SEttinG” menu appears.
Press the
[O/T]
key. “CAL dEF” appears.
2
When “CAL dEF” appears, press the
[O/T]
key.
The “E CAL” display appear.
3
Press the
[CAL]
key repeatedly until the
desired setting appears. Select from the following
four types (or two types for AUY series). The sta-
bility mark appears when the currently preset
method is shown.
“E CAL”: Span Calibration with external weights
(E-CAL)
“E tESt”: Calibration test with external weights
(E-tESt)
“i CAL”: Span Calibration with built-in calibration
weight (i-CAL)
(AUW-D/AUW/AUX series only)
“i tESt”: Calibration test with built-in calibration
weight (i-tESt)
(AUW-D/AUW/AUX series only)
4
Press the
[O/T]
key when the desired calibra-
tion setting appears. “CAL dEF” appears when
the setting is made.
5
Press the
[POWER]
key to return. The calibra-
tion type set here can be executed by simply
pressing the
[CAL]
key followed by the
[O/T]
key
from mass display.
(Displays of four menu items)
