3
2. Component Names and Functions
For Basic Operation
2.2 Key Panel and Operation
The following is a list of the functions for each key.
*1 Either “Taring” (at a weight exceeding 2.0% of the capacity) or “Zero-setting” (at a weight within 2.0% of the
capacity) takes place with a verified balance as a legal measuring instrument in EU.
*2 Output is not made until the display is stable with a verified balance as a legal measuring instrument in EU.
*3 Not applicable to a verified balance as a legal measuring instrument in EU.
Key
During Measurement
Pressed once and released
Pressed and held for about 3 seconds
[POWER]
Switches between the operation and standby modes.
Switches the key notification buzzer on/off.
[CAL]
Enter calibration or menu item selection.
Enter calibration or menu item selection.
[O/T]
Tares the balance. (Displays zero.)
*1
[UNIT]
Switches the units of measurement.
[PRINT]
Outputs the displayed values to an electronic printer,
computer, or other external devices.
*2
Outputs the date and time to external
devices. (Not with AUY)
[1d/10d]
AUW/AUX/AUY
Switches display between 1d/10d. (Minimum display is rounded by one digit.)
*3
AUW-D
Switches the weighing range.
Key
During Menu Item Selection
Pressed once and released
Pressed and held for about 3 seconds
[POWER]
Return to the menu above the current menu level.
Returns to mass display.
[CAL]
Moves to the next menu item.
[O/T]
Select or set the displayed item, or enter into the displayed menu.
[UNIT]
Numerical value input, increases the numeric value of the blinking digit by 1.
[PRINT]
Numerical value input, moves the blinking digit.
[1d/10d]
No effect.
O/T
1d/10d
UNIT
POWER
B
R K
C A L
MENU
[POWER]
key
[CAL]
key
[O/T]
key
[UNIT]
key
[PRINT]
key
[1d/10d]
key
