94
8
APPLICATION FUNCTION MODE
This function allows for switching of calculation formulas by switching "AIR.COR. ON and OFF.
Solid density and liquid density can be measured by selecting from the 2 formulas as shown in the table
below. Select the formula before carrying out measurement.
"AIR.COR" settings
OFF (calculation with no correction for
air buoyancy)
*Default setting
ON (calculation with correction for air
buoyancy)
Solid
density
Formula which does not include air
buoyancy correction
: Mass of sample measured in air
: Mass of sample measured in liquid
: Density of liquid used (normally water)
Formula which does include air buoyancy
correction
: Mass of sample measured in air
: Mass of sample measured in liquid
: Density of liquid used (normally water)
: Density of air 0.0012 g/cm
3
Liquid
density
Formula which does not include air
buoyancy correction
: Mass of sinker measured in air
: Mass (apparent) of sinker measured in liquid
: Volume density of sinker used
W
a
−
W
l
W
a
W
l
Formula which does include air buoyancy
correction
: Mass of sinker measured in air
: Mass (apparent) of sinker measured in liquid
: Volume density of sinker used
: Density of air 0.0012 g/cm
3
W
a
− W
l
W
a
W
l
Density/Specific
Gravity Calculation
Formula Selection
Summary of Contents for ATX-R Series
Page 3: ......
Page 159: ...158 MEMO...