Shimadzu ATX-R Series, Instruction Manual, Page: 101 / 160

100
V
Measuring Specific Gravity of Liquids (Liquid Specific Gravity Measurement)
8
APPLICATION FUNCTION MODE
4
Input the sinker volume.
Next the singer volume will be displayed as
shown in the figure to the right, so press the
key, and the values can then be re-
input according to the below table.
Value input
The balance display will switch to value input mode,
and the 1st digit will blink and be able to be changed
as described below.
Increase value
Decrease value
Move right
Confirm value
The "#" symbol indicates the balance is in value
input mode.
The first digit from the right will blink and can
be changed.
Use the cursor keys to enter the sinker volume.
(
^
P.100)
5
After entering the sinker volume,
"SET" will be displayed for 3
seconds, and then the device will
switch to liquid density
measurement mode.
*
To exit liquid density measurement mode
Press and hold for 3 seconds to switch to weighing mode.
*
Refer to p.93 to p.97 for data hold function and density/specific gravity calculation method
selection settings.