116
10
CONNECTION AND COMMUNICATION WITH PERIPHERAL DEVICES
It is possible to output weight values, setting details and other data from printers, PLCs and other serial
communication equipment, and to personal computers. This section explains useful functions for
connecting and outputting data to these types of external equipment. The rear of the balance is equipped
with various types of connectors that are compatible with the external equipment that is to be connected.
Connecting Printers
It is possible to connect the special EP-100/EP-110
printers for printing weight values, setting statuses
and other data. Connect the printer to the balance in
accordance with the following procedures.
1
Switch off the power to the balance
and the printer
2
Firmly connect the cable (supplied
with the printer) from the RS232C
serial connector on the balance to the
connector on the printer
3
Switch on the power to the balance
4
Switch on the power to the printer
5
Press on the balance, and
then check operations to make sure
the measurement values are printed
normally.
*
Points to Note
Switch off the power to the printer before switching off the balance. Refer to the printer’s instruction
manual for details on the printer.
プリンタ
EP-100/EP-110
専用ケーブル付属
Special cable is provided
EP-100/EP-110 Printer
Rear of the balance
RS232C
USB DEVISE
Connecting
External Equipment
Summary of Contents for ATX-R Series
Page 3: ......
Page 159: ...158 MEMO...