Sherwood Newcastle P-965, Operating Instructions Manual

Page: 39 / 67

ENGLISH
39
RECORDING
• The analog signals from the 8 CH DIRECT inputs as well as the digital signals from DIGITAL inputs or USB can be heard but
cannot be recorded.
• The volume, channel level, tone(bass, treble) settings, etc. have no effect on the recording signals.
Start recoding on the component
connected to TAPE MONITOR.
2
Select the desired input as a recording source
except TAPE MONITOR.
1
Start play on the desired input.
3
• You can select “VID 6” on the page 2 of “AUD 1” on
the remote control.
• You can select “VID 6” on the page 2 of “AUD 1” on
the remote control.
• For tape monitor function, refer to “TAPE MONITOR
function” on page 22.
• When the AUX IN/OUT jacks are connected to audio
recording component such as MD recorder, tape
deck, etc., in the same manner, recording with AUX
can be performed.
Start recording on the component
connected to VIDEO 1.
2
Select the desired input of VIDEO 2~ 6 as
a recording source except VIDEO 1.
1
Start play on the desired input.
3
or
STANDBY
POWER ON
AUD1
TUNER VID1
CD VID2
T.MON VID3
AUX VID4
PHONO VID5
PAGE1
VIDEO
• The audio and video signals from the desired input
will be dubbed onto the VIDEO 1and you can enjoy
them on the TV set and from the speakers.
• When the VIDEO 2(/ROOM 2) IN/OUT jacks are
connected to video recording component such as
video deck, etc., in the same manner, recording with
VIDEO 2 can be performed.
(If this is the case, be sure to deactivate the ROOM 2
function.)
Dubbing from video components onto
VIDEO 1
Recording with TAPE MONITOR
Select VIDEO 2 as a image recording
source with performing “When selecting
the CURRENT VIDEO” procedure on
page 53.
2
Select CD as an sound recording source.
Example) When dubbing the VIDEO 2 image signal and
the CD sound signal separately onto VIDEO 1.
1
or
STANDBY
POWER ON
AUD1
TUNER VID1
CD VID2
T.MON VID3
AUX VID4
PHONO VID5
PAGE1
AUDIO
Dubbing the sound and image signals
separately onto VIDEO 1
Image source
Sound source
Image source
Sound source
or
STANDBY
POWER ON
AUD1
TUNER VID1
CD VID2
T.MON VID3
AUX VID4
PHONO VID5
PAGE1
VIDEO AUDIO