ENGLISH
30
• This mode creates a virtual surround sound field using as few as two front speakers, allowing you to experience
listening from 5.1 channel speakers.
Note : Before using Dolby Virtual Speaker function, first set the speaker layout and virtualization mode as
desired.(For details, “When selecting the VIRTUAL SPEAKER SETUP” on page 48.)
• While playing in a surround mode,
• “DOLBY VS ~” is displayed and combined with the original
surround mode, this mode is activated.
• To cancel the Dolby Virtual Speaker mode, press this button again.
Then it returns to the previous mode.
• The desired mode can be selected with pressing the CURSOR LEFT
(
◀
) button only when the OSD menu operation is not performed.
• The Dolby Headphone function simulates 5.1 channel surround sound, which allows you to enjoy 5.1 channel
surround sound through 2 channel headphones, just like listening from 5.1 channel speakers.
Note : Only when the HEADPHONE SELECTOR button is set to the speaker off mode, the Dolby Headphone
mode can be selected.
• While listening with headphones, select the desired Dolby Headphone mode.
• Each time this button is pressed, the mode changes as follows :
DOLBY HEADPHONE 1: This simulates the soundfield as if you were in
a relatively small room with less
reverberations.
DOLBY HEADPHONE 2: This simulates the soundfield as if you were in
a typical listening room with moderate
reverberations.
DOLBY HEADPHONE 3: This simulates the soundfield as if you were in
a large space like theater.
Off : It returns to the previous mode.
In case of playing the digital signals from DTS, Dolby Digital or
MPEG sources, it will enter the 2CH downmix mode.
• In case of playing in a surround mode before using headphones,
combined with the original surround mode, the selected Dolby
Headphone mode is activated.
• The desired mode can be selected with pressing the CURSOR UP(
▲
)
button only when the OSD menu operation is not performed.
Listening in a Dolby Virtual Speaker mode
Listening in a Dolby Headphone mode
or
STANDBY
POWER ON
MAIN
PAGE
FAV
MUTE
CH.
SET
VOL
RETURN
DISP
MI
OSD/MENU
1
STEREO
CH/
ADJUST
2
3
4
5
6
7
8
9
0
ENT
M2
M3
DSP
DECODE
DSP
RNC-510
• You can set the surround back channel mode according to surround back speaker connection.
• Each time this button is pressed, the mode changes as follows :
1 channel : When a surround back speaker is connected.
2 channel : When two surround back speakers are connected.
None : When surround back speakers are not connected.
Note:
• When the surround speaker is set to “None”, the surround back channel is automatically set to None.
Selecting the surround back channel mode as connected
STANDBY
POWER ON
AUD2
SLEEP
D/A
DIMM
S.A/B
ROOM2
SUR.B
T.TON
PURE
OSD
PARA.
PAGE1
or
STANDBY
POWER ON
MAIN
PAGE
FAV
MUTE
CH.
SET
VOL
RETURN
DISP
MI
OSD/MENU
1
STEREO
CH/
ADJUST
2
3
4
5
6
7
8
9
0
ENT
M2
M3
DSP
DECODE
DSP
RNC-510
