ENGLISH
Continued
29
To enjoy Dolby Pro Logic IIx surround even while playing in a surround mode.
• Select the desired Dolby Pro Logic IIx mode.
• Each time this button is pressed, the mode changes as
follows:
PL IIx MOVIE
PL IIx MUSIC
PL IIx GAME
Off(original surround mode)
• Combined with the original surround mode, Dolby Pro Logic IIx decoding creates 6.1 or 7.1 channel surround
sound depending on whether the surround back channel is set to “1CH” or “2CH”.
• The desired mode can be selected with pressing the CURSOR RIGHT(
▶
▶
) button only when the OSD menu
operation is not performed.
• You can select the desired of the combined modes with use of the MULTI CONTROL knob or the DSP MODE
UP(
▶
▶
)/DOWN(
◀
◀
) buttons only when playing a stereo (2 channel) source in a surround mode.
Note :
• When the surround back channel is set to “None”, this function cannot be activated.
When canceling the surround mode for normal stereo operation.
• Depending on the signal format which is being input,
either the stereo mode or the 2CH downmix mode is
selected.
• To cancel either the stereo mode or the 2 CH
downmix mode, select the desired surround mode
with using the MULTI CONTROL knob or DSP
MODE UP/DOWN (
▶
▶
/
◀
◀
) buttons.
2CH downmix mode
• This mode allows the multi-channel signals encoded in DTS, Dolby Digital or MPEG format to be mixed down into
2 front channels and to be reproduced through only two front speakers or through headphones.
• When the HEADPHONE SELECTOR button is set to the speaker off mode to listen with headphones, if the Dolby
Headphone off mode is selected while playing the digital signals from DTS, Dolby Digital or MPEG sources, it will
enter the 2CH downmix mode automatically.
To cancel the 2CH dwonmix mode, select the desired Dolby Headphone mode with pressing the DOLBY
HEADPHONE button.(For details, refer to “Listening in a Dolby Headphone mode” on page 30.)
STANDBY
POWER ON
MAIN
PAGE
FAV
MUTE
CH.
SET
VOL
RETURN
DISP
MI
OSD/MENU
1
STEREO
CH/
ADJUST
2
3
4
5
6
7
8
9
0
ENT
M2
M3
DSP
DECODE
DSP
RNC-510
or
STEREO
STEREO
or
STANDBY
POWER ON
MAIN
PAGE
FAV
MUTE
CH.
SET
VOL
RETURN
DISP
MI
OSD/MENU
1
STEREO
CH/
ADJUST
2
3
4
5
6
7
8
9
0
ENT
M2
M3
DSP
DECODE
DSP
RNC-510
