ENGLISH
Repeat the above steps
①
to
③
to
memorize other stations.
4
• When using the NUMERIC buttons on the remote
control.
Examples) For “3” :
For “15” :
For “30” :
• The station has now been stored in the memory.
• When using the NUMERIC buttons, the station is
stored automatically without pressing the
(ENTER/)MEMORY button.
• A stored frequency is erased from the memory by
storing another frequency in its place.
• If “MEMORY” goes off, start again from the above
step
②
.
MEMORY BACKUP FUNCTION
The following items, set before the unit is turned off,
are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations, etc.
Note : If the electricity fails or the AC input cord is
disconnected for about 2 weeks, they are all
cleared. So you should memorize them again.
• When using the NUMERIC buttons on the remote
control.
Examples) For “3”:
For “15”:
For “30”:
Select the desired preset number (1~30) and press the (ENTER/)MEMORY button.
3
STANDBY
POWER ON
AUD2
SCH.M
E.TA
PTY S
E.PTY
MEMO
P.SCA
TUNE+
PSET+
TUNE-
PSET-
PAGE2
STANDBY
POWER ON
AUD2
SCH.M
E.TA
PTY S
E.PTY
MEMO
P.SCA
TUNE+
PSET+
TUNE-
PSET-
PAGE2
PRESET
+
ENTER/MEMO
• After selecting the tuner as input source, select the desired preset number.
Tuning to preset stations
STANDBY
POWER ON
AUD2
SCH.M
E.TA
PTY S
E.PTY
MEMO
P.SCA
TUNE+
PSET+
TUNE-
PSET-
PAGE2
PRESET
+
or
34
• You can store up to 30 preferred stations in the
memory.
• “MEMORY” is flickering for several seconds.
Manual presetting
Tune in the desired station with auto or
manual tuning.
1
Press the (ENTER/) MEMORY button.
2
ENTER/MEMO
or
STANDBY
POWER ON
AUD2
SCH,M
E.TA
PTY S
E.PTY
MEMO
P.SCA
TUNE+
PSET+
TUNE-
PSET-
PAGE2
within 2 seconds
3
1
5
0
within 2 seconds
3
1
5
0
