8
5.1.3 MIG brazing and
5.1.3.1 Welding and brazing gas-shielded
Terminal current holder should be connected to MIG (1). Gas conduit from the regulator, lead and attach to the gas nozzle (8) on the back of the device.
Plug polarization changes (4) in the socket (3). The negative pole of the source (5) connected to the work piece by means of a wire with a clamp. Plug
the device into a power outlet 230V 50Hz.
the device into a power outlet 230V 50Hz.
5.1.3.2 self-shielded welding steel wire
Terminal current holder should be connected to MIG (1). Plug polarization changes (4) in the socket (5). The positive pole of the source (3) connected to
the work piece by means of a wire with a clamp. Plug the device into a power outlet 230V 50Hz.