Car security systems
73
73
73
73
Method
Method
Method
Method of
of
of
of setting
setting
setting
setting 2
2
2
2
The method of setting may use in the cars, which have three and more wired rated wiring harness of antenna, moving to
ring of antenna around the locking ignition or do not admit joint of wire of rated bobbin of antenna (for the part of cars of
European made).
The
The
The
The method
method
method
method may
may
may
may work
work
work
work not
not
not
not with
with
with
with all
all
all
all pulse
pulse
pulse
pulse transponder
transponder
transponder
transponder system
system
system
system
1.
Open the module and insert to its key, thus, in order for the end of key was inside of ring of receiver, which is formed
by flat cable, as shown in picture.
Fix the key in place and close the module.
2.
Assemble the cover around the locking ignition of the car and find ringed antenna of rated module of transceiver.
3.
Install ringed antenna BX-400 in immediate neighborhood from rated ringed antenna.
4.
Connect red wire of three wired joint to protected fuse wire of de12V, whatever delivery is promised to the
wire always or only in turned of ignition on.
5.
Connect brown-white wire to output of channel CH6 of system ZX-1060, to which during all time of working
equipment of remote start always “mass” is promised.
After successful testing of installation by remote starting engine of the car assemble the cover around locking
ignition.
Supplementary ring
(bobbin) BX-400
Reading bobbin
Key of the car
with code chip
Red
Brown-white
To output of module of remote
start, to which during start of
always “mass” is promised.
Rated ring (bobbin)
of immobilizer
Rated
module
of immobilizer
Black
Black-white
