ShenZhen YH Innovative Technology, Inc.
58
58
58
58
Description
Description
Description
Description of
of
of
of function
function
function
function of
of
of
of wires
wires
wires
wires 9-contact
9-contact
9-contact
9-contact joint
joint
joint
joint of
of
of
of system
system
system
system N2
N2
N2
N2
1 – HB (-) – manual brake (grey wire).
Input for connection to switch of parking brake for providing of safe start of
engine.
Input permits working function of auto run of system, if it is connected with mass.
2 – RS (-) – outside start of engine (orange wire with white strip).
Input of remote start of engine from any outside
resources (outside temperature, temporary or another controller) by closing to mass to time more 0.3 second.
3 – STARTER (+) (blue wire with white strip).
Input of control over command of starting starter by built-in relay of
control over start of starter of system ZX-1060.
Built-in relay of control over starter ZX-1060 provides the protection
against start of starter at winded engine, also permits to organize supplementary built-in blockage of starter by protective
system.
Cut the wire of control over starter of moving out of lock of ignition.
Connect (before breaking off) to the
end of wire of STARTER of locking ignition of the car.
Connect strong wire STARTER of strong breaking off of
control over auto run to outgoing to starter of the end of wire.
4 – DIESEL (+) (bottle green wire with red strip “DIESEL LAMP (+)”) – the wire of control over start of engine with
delaying start for diesel engine.
Connect to the wire of lamp of preparedness of starting diesel.
Permit the rolling
starter after warming fuel nozzle.
5 – UNLOCK (-) (white wire with black strip). Deblocking of doors` lock (momentary connection of wire with mass).
System ZX-1060 permits to actualize the function of central lock which controlling from cabin of the car with the help of
supplementary three positioned switch.
Installed inside the cabin switch.
You can at any time block or unblock the
doors` locking of the car for providing Your safety. Supplementary switch of central lock does not enter to complement
of system and is obtained separately.
6 – LOCK (-) (yellow wire with black strip).
Blockage of doors` lock (momentary connection of wire with mass).
Use three positioned switch with two pressure spring condition for realization of function of central lock in cabin of the
car.
7 – Channel CH3 (-) (green wire with white strip).
Output of three channels of system CH3.
Channel CH3 permits to
control over different supplementary equipments, which connected to system.
For delivery of control over signal to supplementary equipment by channel CH3 use trinket-transmitter according to
tables 1 and 2 commands of control over system, also use the table of programmable function for choice of required
parameters F10.
Green wire with white strip is weak current transistor output, therefore, it must be used only for turning
of outside relay on.
8 – Channel CH4 (-) (green wire with black strip).
Weak current channel of control over different supplementary
equipment, which connected to system (maximal current 300 milliampere).
Output of channel CH4 is connected with “mass” during the time of activation channel.
Output of channel CH4 – weak
current output which is preassigned for control over winding of supplementary relay or equivalent weak current loading.
For the delivery of controlling signal to supplementary equipment by channel CH4 use trinket-transmitter according to
tables 1 and 2 commands of control over system, also use the table of programmable function for choice of required
parameters F11.
Channel CH4 is activated automatically by system which is depending on programmable condition in
function F11.
By default the output of channel CH4 is programmed to delivery of pulse signal by length 1 second at
setting of system to protection.
9 – Channel CH6 (-) (Cambridge blue wire with green strip).
Channel CH6 is preassigned for control over equipments
of detour of rated immobilizers of the car or other systems.
�
Pulse output of negative polarity.
Activate at any time until system accomplishes the procedure of automatic start
and engine works under control over ZX-1060.
Turning of auto run off abolishes action of pulse at any time.
�
Pulse output of negative polarity.
Activate at turning of line ING1 on at time before close of rolling starter (until
the engine is started).
�
1 second pulse output of negative polarity.
Activate at turning of line ING1 of system of auto run off or at turning
of ignition off by the key.
