Shel lab BACTRON300, Installation And Operation Manual, Page: 8 / 86

8 | P a g e
RECEIVING YOUR BACTRON
Before leaving our factory, all BACTRONs are packaged in high-quality shipping materials to
provide protection from transportation-related damage. When the unit departs the factory, safe
delivery becomes the responsibility of the carrier. Damage sustained during transit is not covered
by the
BACTRON’s warranty.
This makes it important that you inspect your BACTRON for concealed loss or damage to its
interior and exterior when receiving it. If you find any damage to the workstation,
follow the carrier’s
procedure for claiming damage or loss. See the orientation photos on the following pages for a
visual reference.
I
NSPECTING THE
S
HIPMENT
Carefully inspect the shipping carton for damage. Report any damage to the carrier service that
delivered the BACTRON. If the carton is not damaged, open the carton and remove the contents.
Carefully check all packaging before discarding. Save the shipping carton until you are certain that
the unit and its accessories function properly.
The unit should come with an Installation and Operation Manual and a Certificate of Compliance .
Verify that the correct number of items are included with the unit:
Anaerobic Monitoring
Strips (5 packets)
Arm Port Door
Left
Arm Port Door
Right
BACTRON300 / 900
Shelf Spacers (3) BACTRON600
Arm Port Door
Stands (2)
2 Catalyst Cartridges
Leave in Package!
Do not Unwrap Yet!
Foot Pedal Unit Gas Regulator
Kit, AMG LED Lamp Unit Leveling Feet (4)
BACTRON300/900
Petrie Dish Rack (7)
BACTRON600/900
Petrie Dish Rack (10)
Power Cord NEMA
5-15P
Vacuum Pump 110 -
120 Volt
2 Sleeve
Assemblies
(Size 8 Medium)
Small Large
See page 78 for component replacement part numbers