Shaver HD-12-H, Operator'S Manual

Page: 15 / 56

3 . Attach the three main hydraulic hoses.
(G15) Valve to Drive Ram Hose. (G17) Pressure Supply
Hose. (G20) Return Hose.
a . Apply paste-type thread sealant (T12)
to the pipe thread hose fittings and
install drive cylinder hose (G15) (1” I.D.
x 35”) between hydraulic control valve
(H1) and drive cylinder assembly (C1).
Tighten the hose fittings securely.
(C1) Drive Cylinder Assembly. (G15) Valve to Drive Ram
Hose. (H1) Hydraulic Control Valve.
b . Connect the threaded fitting on
pressure hose (G17) (1/2” x 120”) to
hydraulic control valve (H1) swivel
fitting.
c . Connect the threaded fitting on return
hose (G20) (1” x 120”) to hydraulic
control valve (H1) swivel fitting.
(G17) Pressure Hose. (G20) Return Hose.
(H1) Hydraulic Control Valve.
NOTE : The owner/operator must supply
suitable hydraulic quick disconnect fittings for
connecting pressure supply hose (G17) and
return hose (G20) to the tractor or power
supply hydraulic system.
15