Potential pinch points.
Keep hands clear of Post
Driver while operating.
Never place hand(s) on
top of a post when inserting it into
the Post Driver. Always close the safety arm
before driving the post.
5
.
With drive ram (A1) in the raised position,
open safety arm frame (
I
2) and place a
fence post in the drive ram I-beam, under
the drive ram plate. There should be a
1” to 2” gap between the top of the fence
post and the bottom of the drive ram plate.
NOTE
: For clarity, the photo below shows the
rubber debris guard raised up. Never drive a
fence post without the guard in place over the
drive ram plate.
6
.
Close safety arm frame (
I
2) to secure the
post (the adjustable roller assembly keeps
tension on the post while it is being driven).
(
I
2) Safety Arm Frame.
7
.
Do not
stand in front of the drive ram while
operating the Post Driver. Stand at a
45 degree angle to the side of the Post
Driver, in front of the hydraulic control valve.
WARNING
26
Summary of Contents for HD-12-H
Page 44: ...44 Service Parts 44 Driver Assembly ...
Page 46: ...46 Hydraulic Base Plate Assembly ...
Page 55: ...Notes 55 ...
