-61
Appendix
1
2
STANDBY
button
"
"
"
"
"
Bottom view
"
"
"
"
"
Front view
Air filter
(not removable)
STANDBY
button
User service screw
(for filter cover)
Tab
Air filter
Air filter
Replacing the Air Filter
Cleaning and Replacing
the Air Filter
1
Put the projector into the standby
mode, and disconnect the power
cord.
•
Press
on the projector or
on
the remote control, and wait until the cool-
ing fan stops.
2
Remove the filter cover on the
bottom of the projector.
•
Turn the projector over. Loosen the user
service screw (for filter cover) (
1
) that se-
cures the filter cover. Pressing the tab, re-
move the filter cover (
2
).
3
Remove the air filter.
•
Pick the air filter up with your fingers and
lift it out of the filter cover.
• This projector is equipped with air filters
to ensure the optimal operating condi-
tion of the projector.
• The air filters should be cleaned every
100 hours of use. Clean the filters more
often when the projector is used in a
dusty or smoky location.
• Ask your nearest Sharp Authorized Pro-
jector Dealer or Service Center to ex-
change the filter (PFILDA010WJZZ) when
it is no longer possible to clean.
XV_Z10E_E_p52_62.p65
03.11.7, 4:19 PM
61
Summary of Contents for XV-Z10E
Page 71: ...Memo ...
Page 72: ......
