-45
Adjustments and Settings
Computer Image Adjustment
Note
•
You can automatically adjust the computer im-
age by setting “Auto Sync” to “
” (ON) on the
“Fine Sync” menu or pressing
on the re-
mote control. See the next page for details.
•
To reset all adjustment items, select “Reset” and
press
.
•
“Clock” and “Phase” cannot be adjusted when
“Signal Type” is set to “Component”.
Description of Adjustment Items
Using the “Fine Sync” menu, you can adjust the computer image, match the computer dis-
play mode, and check the input signal.
Selectable items
Clock
Phase
H-Pos
V-Pos
Use
\
and
|
to
adjust vertical noise.
adjust horizontal noise (similar to tracking
on your VCR).
centre the on-screen image by moving it to
the left or right.
centre the on-screen image by moving it up
or down.
Adjusting the Computer
Image
When “Auto Sync” is set to OFF or when vertical
stripes or flickering occur in portions of the
screen even if “Auto Sync” is set to “
” (ON),
adjust “Clock”, “Phase”, “H-Pos” or “V-Pos” to
obtain the best computer image.
Select the item on the “Fine Sync” menu
and adjust the computer image.
Adjusting the menu screen
Page
36
Example: “Fine Sync” menu screen for
INPUT 1 (RGB) mode
Special Modes
(Special
Mode Settings)
Ordinarily, the type of input signal is detected and
the correct resolution mode is automatically se-
lected. However, for some signals, the optimal
resolution mode in “Special Modes” on the “Fine
Sync” menu may need to be selected to match
the computer display mode.
Select “Special Modes” on the “Fine Sync”
menu and the appropriate resolution.
Setting the menu screen
Page
38
Example: “Fine Sync” menu screen for
INPUT 1 (RGB) mode
Note
•
If your computer displays patterns which re-
peat every other line (horizontal stripes), flick-
ering may occur which makes the image hard
to see.
•
When a DVD player or Digital Video is con-
nected, select 480P as the input signal.
•
When video equipment outputting 750P signal
is connected, select 720P as the input signal.
When inputting 720P signal from the video
equipment, select “720P”. When inputting 1280
×
720 signal from the computer, select “HTPC”.
•
See “Signal Info (Checking the Input Signal)”
on page
46
for information on the currently se-
lected input signal.
XV_Z10E_E_p42_47.p65
03.11.7, 4:18 PM
45
Summary of Contents for XV-Z10E
Page 71: ...Memo ...
Page 72: ......
